GitLab JIRA integration
GitLab can be configured to interact with JIRA Core either using an on-premises instance or the SaaS solution that Atlassian offers. Configuration happens via username and password on a per-project basis. Connecting to a JIRA server via CAS is not possible.
Each project can be configured to connect to a different JIRA instance or, in case you have a single JIRA instance, you can pre-fill the JIRA service settings page in GitLab with a default template. To configure the JIRA template, see the Services Templates documentation.
Once the GitLab project is connected to JIRA, you can reference and close the issues in JIRA directly from GitLab's merge requests.
The configuration consists of two parts:
First things first, we need to create a user in JIRA which will have access to all projects that need to integrate with GitLab.
We have split this stage in steps so it is easier to follow.
Login to your JIRA instance as an administrator and under Administration go to User Management to create a new user.
The next step is to create a new user (e.g.,
gitlab) who has write access to projects in JIRA. Enter the user's name and a valid e-mail address since JIRA sends a verification e-mail to set-up the password. Note: JIRA creates the username automatically by using the e-mail prefix. You can change it later if you want.
Now, let's create a
gitlab-developersgroup which will have write access to projects in JIRA. Go to the Groups tab and select Create group.
Give it an optional description and hit Create group.
Give the newly-created group write access by going to Application access > View configuration and adding the
gitlab-developersgroup to JIRA Core.
gitlabuser to the
gitlab-developersgroup by going to Users > GitLab user > Add group and selecting the
gitlab-developersgroup from the dropdown menu. Notice that the group says Access which is what we aim for.
The JIRA configuration is over. Write down the new JIRA username and its password as they will be needed when configuring GitLab in the next section.
Note: The currently supported JIRA versions are v6.x and v7.x. and GitLab 7.8 or higher is required.
Assuming you have already configured JIRA, now it's time to configure GitLab.
JIRA configuration in GitLab is done via a project's Services.
To enable JIRA integration in a project, navigate to the project's Settings > Services > JIRA.
Fill in the required details on the page, as described in the table below.
||A name for the issue tracker (to differentiate between instances, for example).|
||The URL to the JIRA project which is being linked to this GitLab project. It is of the form:
||The URL to the JIRA project issues overview for the project that is linked to this GitLab project. It is of the form:
||This is the URL to create a new issue in JIRA for the project linked to this GitLab project, and it is of the form:
||The base URL of the JIRA API. It may be omitted, in which case GitLab will automatically use API version
||The username of the user created in configuring JIRA step.|
||The password of the user created in configuring JIRA step.|
||This setting is very important to set up correctly. It is the ID of a transition that moves issues to a closed state. You can find this number under the JIRA workflow administration (Administration > Issues > Workflows) by selecting View under Operations of the desired workflow of your project. The ID of each state can be found inside the parenthesis of each transition name under the Transitions (id) column (see screenshot). By default, this ID is set to
After saving the configuration, your GitLab project will be able to interact with the linked JIRA project.
For example, given the settings below:
- the JIRA URL is
- the project is named
- the user is named
- the JIRA issue transition is 151 (based on the JIRA issue transition)
the following screenshot shows how the JIRA service settings should look like.
By now you should have configured JIRA and enabled the JIRA service in GitLab. If everything is set up correctly you should be able to reference and close JIRA issues by just mentioning their ID in GitLab commits and merge requests.
Referencing JIRA Issues
If you reference a JIRA issue, e.g.,
GITLAB-1, in a commit comment, a link
which points back to JIRA is created.
The same works for comments in merge requests as well.
The mentioning action is two-fold, so a comment with a JIRA issue in GitLab will automatically add a comment in that particular JIRA issue with the link back to GitLab.
The comment on the JIRA issue is of the form:
USER mentioned this issue in LINK_TO_THE_MENTION
||A user that mentioned the issue. This is the link to the user profile in GitLab.|
||Link to the origin of mention with a name of the entity where JIRA issue was mentioned. Can be commit or merge request.|
Closing JIRA issues
JIRA issues can be closed directly from GitLab by using trigger words in commits and merge requests. When a commit which contains the trigger word followed by the JIRA issue ID in the commit message is pushed, GitLab will add a comment in the mentioned JIRA issue and immediately close it (provided the transition ID was set up correctly).
There are currently three trigger words, and you can use either one to achieve the same goal:
GITLAB-1 the issue ID of the JIRA project.
JIRA issue closing example
Let's say for example that we submitted a bug fix and created a merge request in GitLab. The workflow would be something like this:
- Create a new branch
- Fix the bug
- Commit the changes and push branch to GitLab
- Open a new merge request and reference the JIRA issue including one of the
trigger words, e.g.:
Fixes GITLAB-1, in the description
- Submit the merge request
- Ask someone to review
- Merge the merge request
- The JIRA issue is automatically closed
In the following screenshot you can see what the link references to the JIRA issue look like.
Once this merge request is merged, the JIRA issue will be automatically closed with a link to the commit that resolved the issue.
You can see from the above image that there are four references to GitLab:
- The first is from a comment in a specific commit
- The second is from the JIRA issue reference in the merge request description
- The third is from the actual commit that solved the issue
- And the fourth is from the commit that the merge request created
GitLab is unable to comment on a ticket
Make sure that the user you set up for GitLab to communicate with JIRA has the correct access permission to post comments on a ticket and to also transition the ticket, if you'd like GitLab to also take care of closing them.
GitLab is unable to close a ticket
Make sure the the
Transition ID you set within the JIRA settings matches the
one your project needs to close a ticket.